- No products in the cart.
PolyMax™ PLA is a 3D printing material with excellent mechanical properties and printing quality. PolyMax™ PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.
|EMEA||North America||Asia Pacific|
|Black 1.75mm||Coming Soon||Coming Soon||Available|
|White 2.85mm||Coming Soon||Coming Soon||Coming Soon|
Recommended 3D printing temperature
190 – 220 °C (Diameter of 1.75mm)
200 – 220 °C (Diameter of 2.85mm)
Recommended 3D print speed
40 – 90 mm/s
Recommended heated bed temperature
All our products work well with common build plate surfaces such as the blue tape, Kapton tape, glass, etc. However for the best user experience, we recommend that you use our materials with BuildTak™, a build plate surface designed specifically for desktop FDM/FFF printers. You can buy this material on the BuildTak™ website www.buildtak.com
Extremely Tough : Regular PLA is a very brittle material, which greatly limits its range of applications. PolyMax™ PLA was designed to change this. Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, PolyMax™ PLA is a sure winner when it comes to toughness. So if you are looking for a material that can withstand your mechanically demanding tasks, PolyMax™ PLA is up to the challenge.
Uncompromised Quality : The good mechanical strength of PolyMax™ PLA is achieved with no compromise in printing quality. As PolyMax™ PLA is also produced with Jam-Free™ technology you can be certain you will get high quality prints with excellent strength while still enjoying the ease of printing PLA.
ABS? No More : Still printing ABS while trying to endure the odour and potential health risk? With PolyMax™ PLA you can get rid of that potentially hazardous ABS and still achieve the same structural strength with even more benefits such better printer compatibility, easier printing, less warping, no hazardous odours, and in many cases even better mechanical properties.